Setting A Key Buzzer; Setting The Confirm. Feed; Setting The Space Feed Mode - MIMAKI TS300P-1800 Operation Manual

Setting a KEY BUZZER

You can turn off the buzzer sound when pressing the key.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) twice.
2
Press to select "KEY BUZZER",
3
and press the
Press to select a set value, and
4
press the
• Set value : ON/ OFF
Press the
5
end the setting.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.

Setting the CONFIRM. FEED

Set whether media feeding is performed for checking the
result of the test printing etc. or not.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) twice.
2
Press to select "CONFIRM.
3
FEED", and press the
Press to select a set value, and
4
press the
• Set value : ON/ OFF
Press the
5
end the setting.
(twice)
key.
key.
key several times to
(twice)
key .
key .
key several times to
Chapter 3 Mchine setting

Setting the SPACE FEED MODE

Change the feed mode of the margin included in the
image data (the space of no data to be printed). If print
data with much margin, set to "continuous", then the print
time can be shorten.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) twice.
2
Press
3
MODE" , and press the
Press
4
press the
INTERMITTENT：Perform
operation of the path division unit
CONTINUOUS ：Feed the no data part at a time
Press the
5
end the setting.
(MENU) (twice)
to select "SPACE FEED
key.
to select a set value, and
key.
intermittent feed
key several times to
1
2
3
4
5
6
3-19