Warning / Error Messages; Warning Messages - MIMAKI SIJ-320UV Operation Manual

Warning / Error Messages

If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.

Warning messages

Errors when performing operations
Message
ERROR 901
INVALID OPERATION
ERROR 902
DATA REMAIN
ERROR 90f
PRINT AREA SHORT
Errors when ink charging is performed
Message
INK IC Expiration
CHARGE ANYWAY?
IC Expiration:1MONTH
CHARGE ANYWAY?
IC Expiration:2MONTH
CANNOT CHARGE
WRONG INK IC
CANNOT CHARGE
INK IC ALREADY USED
CANNOT CHARGE
INK TYPE
CANNOT CHARGE
INK COLOR
CANNOT CHARGE
Expiration
CHARGE ANYWAY?
Expiration:1MONTH
CHARGE ANYWAY?
Expiration:2MONTH
CANNOT CHARGE
INK LEVEL REMAINS
CANNOT CHARGE
INK LEVEL REMAINS
CHARGE ANYWAY?
Cause
Operation error
There remains received data that has not
yet been printed.
The media is not wide or long enough for
printing.
Cause
The expiration date for the inserted IC chip
has passed.
The expiration date of the inserted IC chip
has passed (one month has passed after
the specified expiration date).
The expiration date of the inserted IC chip
has passed (two months have passed after
the specified expiration date).).
The IC chip cannot be read normally.
An IC chip that has already been charged
was inserted.
The type of ink on the inserted IC chip is
different from the ink in the bottle.
The color of ink on the inserted IC chip is
different from the ink in the bottle.
The expiration date of the ink currently in
use has passed.
The expiration date of the ink currently in
use has passed. (one month has passed
after the specified expiration date).
The expiration date of the ink currently in
use has passed. (one month has passed
after the specified expiration date).
The charged ink level is nearly full, so ink
cannot be charged.
Ink charging is attempted when the
charged ink amount remains more than a
certain level.
Chapter 5 Troubleshooting
Solution
• Return to the LOCAL screen, check the
error status, and take
actions.
• Execute the data clear function.
( P.2-22)
• If the media width is decreased because
the origin is moved, shift the origin to the
right to increase the effective media width.
• Replace the media with one having
enough width or length.
Solution
• Replace the IC chip with the IC chip of a
new ink bottle.
• Select [YES] to continue to use the ink.
• Insert the IC chip of the ink bottle which
has not passed its expiration date.
• Remove the IC chip and insert it again.
• Install the new IC chip.
• Check the type of ink on both the IC chip
and the ink bottle.
• Check the color of ink on both the IC chip
and the ink bottle.
• Check the color of the ink bottle.
• Select disposal operation in the ink tank
menu to dispose of ink in the tank, and
then charge ink again.
• Select [YES] to continue to use the ink.
• Cannot charge ink.
• Select disposal operation in the ink tank
menu to dispose of ink in the tank, and
then charge ink again.
• Check if the IC chip provided with the ink
bottle is inserted.
• Check if the IC chip provided with the ink
bottle is inserted.
• Select [YES] to perform ink charging.
appropriate
1
2
2
2
5
5-7