Warning / Error Messages; Warning Messages - MIMAKI TS500P-3200 Operation Manual

Warning / Error Messages

If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.

Warning messages

Errors when performing operations
Message
ERROR 901
INVALID OPERATION
ERROR 902
DATA REMAIN
ERROR 90d
NO HEAD SELECT
ERROR 90f
PRINT AREA SHORT
ERROR 912
INVALID INK CHARGE
Errors when ink charging is performed
Message
INK IC Expiration
Charge Anyway ?
NO < > YES
IC Expiration:1MONTH
Charge Anyway ?
NO < > YES
IC Expiration:2MONTH
CANNOT CHARGE
WRONG INK IC
CANNOT CHARGE
INK TYPE
CANNOT CHARGE
INK TYPE
CANNOT CHARGE
Cause
Operation error
There remains received data that has not
yet been printed.
Executed the processing without selecting
a head.
The media is not wide or long enough for
printing.
Cannot ink charge by the following factors.
• Detected an abnormality of the informa-
tion of the IC chip.
• The expiration date for the ink has
passed.
• The charged ink level is nearly full, so ink
cannot be charged.
• The expiration date for the ink tank has
passed.
Cause
The expiration date for the inserted IC chip
has passed.
The expiration date of the inserted IC chip
has passed (one month has passed after
the specified expiration date).
The expiration date of the inserted IC chip
has passed (two months have passed after
the specified expiration date).
The IC chip cannot be read normally.
An IC chip that has already been charged
was inserted.
The type of ink on the inserted IC chip is
different from the ink in the bottle.
Chapter 5 Troubleshooting
Solution
• Return to the LOCAL screen, check the
error status, and take appropriate actions.
• Execute the data clear function.
( P.2-20)
• Select the head. ( P.3-20)
• Replace the media with one having
enough width or length.
• If the media width is decreased because
the origin is moved, shift the origin to the
right to increase the effective media
width.
• Please run the ink charge (
again. If you still cannot charge, please
check the cause that cannot be charged
with P.3-28 "Displaying the Information of
this machine".
Solution
• Change the ink bottle with a new one.
• Select [YES] to continue to use the ink.
• Charging is impossible. Insert the IC chip
of the ink bottle which has not passed its
expiration date.
• If the error occurs on the ink which is still
in its expiration date, check the time of
this machine.
• Remove the IC chip generating the warn-
ing once and install it again.
• If the same warning message still
appears, contact your local distributor to
call for service.
• Install the new IC chip.
• Check the type of ink on both the IC chip
and the ink bottle.
1
2
P.1-19)
2
2
5
5-5