Table of Contents
Advertisement
Warning / Error Messages
If some trouble occurs, the buzzer sounds and the display shows a corresponding error message.
Take an appropriate remedy for the displayed error.
Warning messages
Message
C l o s e a c o v e r .
* * NO ME D I A * *
! E X C H A NG E B A T T E R Y
< L OC A L . 1 >
! R e p l a c e a W I P E R
< L OC A L . 1 >
! D o T E S T D R AW
P R E
P R T
B R E A K
* * ゜ C
P R E
P R T
T H E RM
* * ゜ C
< L OC A L . 1 >
N E A R E N D
* R EMO T E . 1 *
N E A R E N D
< L OC A L . 1 >
I N K E N D
* R EMO T E . 1 *
I N K E N D
< L OC A L . 1 >
[ # 0 1 ]
* R EMO T E . 1 *
[ # 0 1 ]
6-6
Downloaded From ManualsPrinter.com Manuals
The front cover or the maintenance
cover is opened.
A media has not been set.
The battery life end of the internal
clock is detected.
Time to replace the wiper in the
capping station with a new one has
[ # 0 1 ]
come.
(The wiping count has reached the
specified value.)
The nozzle recovery cannot be
expected because the machine has
[ # 0 1 ]
been left standing for a prolonged
period of time.
A heater is disconnected.
P O S T
(This example shows that pre-
* * ゜ C
heater is disconnected.)
The thermistor of a heater is
defective.
P O S T
(This example shows that the
* * ゜ C
thermistor of pre-heater is
defective.)
[ # 0 1 ]
MMC C - - - -
Ink for one supply path has been
nearly used up.
[ # 0 1 ]
MMC C - - - -
[ # 0 1 ]
- - - - Y Y K K
Ink for one supply path has been
completely used up.
[ # 0 1 ]
- - - - Y Y K K
! C A R
Ink cannot be supplied due to the
cartridge per one supply path.
! C A R
Cause
Check the front cover and maintenance
covers.
If the same error message appears again
even after closing all the covers, contact
your local distributor to call for service.
Set media.
Contact your local distributor to call for
service.
Replace the wiper with a new one.
(
Perform test printing then check nozzle
clogging.
In the case of nozzle clogging observed,
perform cleaning. (
In the case of significant nozzle clogging
observed, perform the operations of P.5-
10 "Washing of Head nozzle".
Contact your local distributor to call for
service.
Replace the cartridge for the supply path
corresponding to the indicated color.
You can print without replacing the
cartridge (until INK END is displayed).
However, the machine returns to local
mode every completion of printing one file.
Replace the cartridge for the supply path
corresponding to the indicated color.
Check the cartridge for the supply path
corresponding to the indicated color.
Solution
P.5-7)
P.2-33)
Advertisement
Table of Contents
