OTHER UPC/EAN OPTIONS
Enable EAN Two Label
Enables/disables the ability of the scanner to decode EAN two‐label pairs.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
004401(CR)
EAN Two Label = Enable
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
Contact Customer Support for details about advanced program-
ming for this feature.
NOTE
ENTER/EXIT PROGRAMMING MODE
004400(CR)
EAN Two Label = Disable
167