Cisco ASR 9000 Series Command Reference Manual page 1061

T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
Field
P-bit Err Secs
P-bit Severely Err Secs
Severely Err Framing Secs
Unavailable Secs
Line Errored Secs
C-bit Errored Secs
C-bit Severely Errored Secs
Total Data (last 24 hours)
Related Commands
Command
controller e3, on page 972
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description
P-bit errored seconds (PES) is a second with one or
more PCVs, one or more out-of-frame defects, or a
detected incoming AIS. This gauge does not
increment when unavailable seconds are counted.
P-bit severely errored seconds (PSES) is a second
with 44 or more PCVs, one or more out-of-frame
defects, or a detected incoming AIS. This gauge does
not increment when unavailable seconds are counted.
Severely errored framing seconds (SEFS) is a second
with one or more out-of-frame defects or a detected
incoming AIS.
The number of unavailable seconds (UAS) is
calculated by counting the number of seconds for
which the interface is unavailable. For more
information, see RFC 1407, DS3 MIB Variables.
Line errored seconds (LES) is a second in which one
or more code violations or one or more LOS defects
occurred.
C-bit errored seconds (CES) is a second with one or
more C-bit code violations (CCV), one or more
out-of-frame defects, or a detected incoming AIS.
This gauge is not incremented when UASs are
counted.
C-bit severely errored seconds (CSES) is a second
with 44 or more CCVs, one or more out-of-frame
defects, or a detected incoming AIS. This gauge is
not incremented when UASs are counted.
Shows the last 15-minute accumulation period.
Description
Configures an E3 controller and enters E3 configuration mode.
show controllers e3
Release 5.3.x
1041