Cisco ASR 9000 Series Command Reference Manual page 1040

lnm remove
RP/0/RSP0/CPU0:router(config-e1)# lnm remove set line-code-violation 1500 path-code-violation
100 duration 30
RP/0/RSP0/CPU0:router(config-e1)# lnm remove clear line-code-violation 1400
path-code-violation 95 duration 30
Related Commands
Command
clear controller lnm, on page 959
controller e1, on page 970
controller t1, on page 974
lnm minor-warning, on page 1015
lnm syslog, on page 1021
show controllers e1, on page 1034
show controllers lnm, on page 1042
show controllers t1, on page 1046
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1020
T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
Description
Clears link noise monitoring statistics or resets states.
Configures an E1 controller and enters E1 configuration mode.
Enables link noise monitoring and specifies thresholds for noise
errors on T1/E1 links that are used to signal minor warning events
and recovery from those events.
Enables logging of link noise monitoring major, remove, and minor
events and alarms.
Displays information about the E1 links and hardware and software
drivers for the E1 controller.
Displays information about LNM on T1 or E1 links.
Displays information about the T1 links and hardware and software
drivers for the T1 controller.