Outdoor And Transportation Antennas; Supported Extension Bases And Cables - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Outdoor and Transportation Antennas

Outdoor and Transportation Antennas
Antenna
3-in-1 (LTE, GPS)
Vehicle Mount/Fixed
Infrastructure
3-in-1 (LTE, GPS)
Vehicle Mount/Fixed
Infrastructure
5-in-1 (LTE, Wi-Fi, and GPS)
Vehicle Mount/Fixed
Infrastructure
7-in-1 (LTE, Wi-Fi, and GPS)
Low-Profile Transportation
Note Antenna is GNSS
capable.
9-in-1 (LTE, Wi-Fi, and GPS)
Low-Profile Transportation

Supported Extension Bases and Cables

Antenna Type
Indoor (cellular)
Indoor (Wi-Fi)
Outdoor
(cellular)
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
42
PID Antenna Specifications
4G-LTE-ANTM-O-3-B Antenna Type: Multi-Element
Connectors: 4G LTE (2x) TNC (m)
GPS SMA (F)
ANT-3-4G2G1-O Antenna Type: Multi-Element
Connectors: 4G LTE (2x) TNC (m)
GPS SMA (m)
ANT-5-4G2WL2G1-O Antenna Type: Multi-Element
Connectors: Connectors: LTE (2x)
TNC (m)
GPS SMA (m)
Wi-Fi (2x) RP-TNC (m)
ANT-7-5G4WL2G1-O Antenna Type: Multi-Element
Connectors: LTE (4x) SMA (m)
GPS (1x) SMA (m)
Wi-Fi (2x) RP-SMA (m)
5G-ANTM-O-4-B Antenna Type: Multi-Element
Connectors: LTE (4x) SMA (m)
GPS (1x) SMA (m)
Wi-Fi (4x) RP-SMA (m)
Antenna PID
LTE-ANTM2-SMA-D
W-ANTM2050D-RPSMA=
ANT-4G-OMNI-OUT-N
ANT-5G-OMNI-OUT-N
Notes
Antennas will require proper TNC
to SMA adapters.
Location services supported only
in areas with GPS coverage.
Antennas will require proper TNC
to SMA adapters.
Location services supported only
in areas with GPS coverage.
Antennas will require proper TNC
to SMA adapters.
Location services supported only
in areas with GPS coverage.
—
Requires ground disk
(5G-ANTM-GD) with nonmetallic
surface deployment.
Cable PID Extension Base
CAB-L240-10-SM-TM LTE-AE-MAG-SMA
CAB-L240-15-SM-TM
CAB-L240-20-SM-TM
— —
CAB-L240-10-SM-NM —
Antenna Selection and Installation