Clear Controller Backplane Ethernet Location Statistics - Cisco ASR 9000 Series Manual

clear controller backplane ethernet location statistics

clear controller backplane ethernet location statistics
To delete the aggregate statistics of traffic sent and received over the control Ethernet, use the clear controller
backplane ethernet location statistics command in EXEC mode.
clear controller backplane ethernet location node-id statistics
Syntax Description
node-id
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples The following example shows how to clear all client statistics on the node at 0/1/1:
RP/0/RSP0/CPU0:router# clear controller backplane ethernet location 0/1/1 clients all
statistics
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
2
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
Identifies the node whose controller information you want to delete. The node-id
argument is entered in the rack/slot/module notation.
Modification
This command was introduced.
OL-24762-01