Parameters - Yamaha RCX142 User Manual

12. "SYSTEM" mode
4
148
4-

12.1 Parameters

This section explains various parameters relating to the controller setting and robot op-
eration.
There are 4 types of parameters: robot parameters and axis parameters for robot operation,
controller setting parameters and option board parameters.
[Procedure]
1) Press the (PARAM) key in "SYSTEM" mode to enter "SYSTEM>PARAM"
F 1
mode.
2) Press the (ROBOT),
F 1
BRD) key to select the parameter type.
Items for the selected parameter type are displayed.
Fig. 4-12-2 "SYSTEM>PARAM" mode
SYSTEM>PARAM
Robot = TXYx-A
M1= aTx-T6-12
M2= aTy-T6-12
M3= aZF-F10-10V
M4= aRF
ROBOT AXIS
3) Select a parameter item with the cursor (↑/↓) keys.
Or press the (JUMP) key and enter a parameter number to jump to that
F 2
parameter item.
Fig. 4-12-3 Robot parameters
SYSTEM >PARAM>ROBOT
1.Tip weight[kg]
2.Origin sequence
3.R axis orientation
4.Armtype at PGM reset
EDIT JUMP
4) Press the (EDIT) key.
F 1
5) Edit the selected parameter.
There are 2 ways to edit parameters. The first is by entering data with the numeric
keys, and the second is by selecting items with the function keys.
When entering data with the numeric keys, values entered outside the allowable
range are converted automatically to the upper or lower limit value.
Also refer to "12.1.1 Robot parameters", "12.1.2 Axis parameters", "12.1.3 Other
parameters" and "12.1.4 Parameters for option boards".
6) Press the key to quit the parameter editing.
ESC
(AXIS), (OTHERS) or
F 2 F 3
V8.35
M5= no axis
M6= no axis
OTHERS
V8.35
(OP.
F 5
OP.BRD