Displaying The Total Operation Time; System Error Details Display - Yamaha RCX142 User Manual

12. "SYSTEM" mode
4
n
NOTE
All error information will be initialized
when the error history is initialized.
220
4-
12.5.3

Displaying the total operation time

Use the following procedure to check the total controller operation time.
[Procedure]
1) Press the (TOTAL) key.
F 5
Fig. 4-12-101 Displaying the total operation time
SYSTEM >DIAGNOS>TOTAL
Total operation time (04/07/20, 12:05)
Power-on time
Run time
The 3rd line shows the date and time that the total operation time was reset.
The "Power-on time" is the total time that the controller power has been on.
The "Run time" is the total time that the controller has performed automatic
operation.
Pressing the (CLEAR) key resets the total operation time. The display
F 5
shows the new total operation time starting from the date and time after reset.
2) Press the key to return to "SYSTEM>DIAGNOS" mode.
ESC
12.5.4

System error details display

Details of important software errors that have occurred in the past can be displayed.
[Procedure]
1) Press the (SYS. CHK) key.
F 15
Fig. 4-12-102 Error details
SYSTEM>DIAGNOS>SYS.CHK
Exception error Information
Type
ErCode= 000000E0
Inf1
Inf2
"No system error code" will appear if no error has occurred.
2) Press the key to return to the "SYSTEM>DIAGNOS" mode.
ESC
YEAR DAY HOUR MIN
= 0/ 14/ 10: 34
= 0/ 2/
= -16 (04/07/30,13:42:38)
= 841081E6
= 40000030
V8.35
8: 45
CLEAR
V8.35