Directory - Yamaha RCX142 User Manual

n
NOTE
A maximum of 100 programs can be
stored.
n
NOTE
The date and time are updated when
the program is created or edited.

10.3 Directory

When the (DIR) key is pressed in "PROGRAM" mode, information on each
F 3
program appears as shown below.
Fig. 4-10-17 Program information (1)
PROGRAM >DIR
No. Name
1 TEST1
2 *TEST2
3 PARTS100
4 TEST100
NEW
→
Pressing the key on the above screen displays the "DATE" and "TIME"
data.
(Press the key to return to the previous display.)
Fig. 4-10-18 Program data (2)
PROGRAM >DIR
No. Name
1 TEST1
2 *TEST2
3 PARTS100
4 TEST100
NEW
Contents of each item are shown below.
Item
Indicates the serial number of the program. The number of the program which is
No.
currently selected is highlighted (reversed background).
Indicates the program name.
The " * " mark (reversed background) shows this program is compiled and the object
Name
program exists.
The " s " mark (reverse background) shows an object exists in the sequence program.
Line Shows the number of lines in the program.
Shows how many bytes of memory the program uses.
Byte
Indicates the program attribute.
RW/RO RW : Reading or writing enabled.
RO : Reading only enabled; writing inhibited.
Shows the date when the program was made or edited.
Date
Time Shows the time when the program was made or edited.
10. "PROGRAM" mode
<TEST1
Line Byte RW/RO
55 952 RW
50 907 RW
38 843 RW
100 1968 RW
INFO
<TEST1
Date Time
04/08/25 10:18
04/08/26 17:20
04/07/03 13:19
04/07/01 08:35
INFO
Description
>
4
>
57
4-