Advertisement
Operation
Instrument
Controls Menu
Flash Lamp
3-22
Model 43i Trace Level-Enhanced Instruction Manual
In the Main Menu, choose Calibration > Zero/Span Check > Zero/Span
Ratio.
ZERO/SPAN RATIO:
CURRENTLY:
SET TO:
RANGE
The Instrument Controls menu contains a number of items. The software
controls listed in this menu enable control of the listed instrument
functions.
In the Main Menu, choose Instrument Controls.
INSTRUMENT CONTROLS:
>FLASH LAMP
DATALOGGING SETTINGS
COMMUNICATION SETTINGS
I/O CONFIGURATION
TEMPERATURE COMPENSATION
PRESSURE COMPENSATION
SCREEN CONTRAST
RANGE
SERVICE MODE
DATE/TIME
The Flash Lamp screen is used to turn the flash lamp on or off. The flash
lamp must be off when using the optical span test LED. For more
information about the optical span test LED, see "Optical Span Test" later
in this chapter.
In the Main Menu, choose Instrument Controls > Flash Lamp.
FLASH LAMP:
CURRENTLY:
SET TO:
RANGE
1 :1
3 :1 ?
CHANGE VALUE
SAVE VALUE
AVG
DIAGS ALARM
AVG
DIAGS ALARM
OFF ?
TOGGLE VALUE
AVG
DIAGS ALARM
ON
Thermo Fisher Scientific
Advertisement
Troubleshooting
