Advertisement
Operation
Instrument Controls Menu
Analog Inputs
RS-232/RS-485 Selection
3-34
Model 43i Trace Level-Enhanced Instruction Manual
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Select Item > Other Measurements.
OTHER MEASUREMENTS:
>NONE
INT TEMP
CHAMBER TEMP
PERM OVN GAS
PERM OVN HTR
CHAMBER PRES
SAMPLE FLOW
RANGE
PMT VOLTS
FLASH VOLTS
FLASH REF
The Analog Inputs screen allows the user to select the analog input signal
(none or analog inputs 1-8) that is tied to the selected streaming data item.
The selected item is shown by "<--" after it.
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config > Select Item > Analog Inputs.
ANALOG INPUTS:
>NONE
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
RANGE
INPUT 7
INPUT 8
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Equipment Damage Disconnect the serial cable before changing RS-232
and RS-485 selection to prevent damage to the connected equipment.
<--
AVG
DIAGS ALARM
AVG
DIAGS ALARM
<--
Thermo Fisher Scientific
▲
Advertisement
Troubleshooting
