Analog Input Configuration; Descriptor; Units - Thermo Scientific 43i Instruction Manual

Configuration
ANALOG INPUT CONFIG:
>CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
CHANNEL 7
RANGE
CHANNEL 8
Thermo Fisher Scientific
The Analog Input Configuration menu displays a list of the 8 analog input
Analog Input
channels available for configuration. This screen is only displayed if the I/O
expansion board option is installed. Configuration includes entering
descriptor, units, decimal places, and choice of 2-10 table points, and
corresponding number of points selected.
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config.
AVG DIAGS ALARM

Descriptor

The Descriptor screen allows the user to enter the descriptor for the
selected analog input channel. The descriptor is used in datalogging and
streaming data to report what data is being sent out. The descriptor may be
from 1 to 3 characters in length, and defaults to IN1to IN8 (user input
channel number).
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Descriptor.

Units

The Units screen allows the user to enter the units for the selected analog
input channel. The units are displayed on the diagnostic screen and in
datalogging and streaming data. The units may be from 1 to 3 characters in
length, and defaults to V (volts).
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Units.
ANALOG INPUT 01 CONFIG:
IN1
>DESCRIPTOR
IN2 UNITS
IN3
DECIMAL PLACES
IN4
TABLE POINTS
IN5
POINT 1
IN6
POINT 2
IN7
RANGE
IN8
ANALOG INPUT DESCRIPTOR:
ASS
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
RANGE AVG
AVG DIAGS ALARM
BKSP
PAGE
SAVE
DIAGS ALARM
Model 43i Trace Level-Enhanced Instruction Manual
Operation
Instrument Controls Menu
IN1
V
2
2
3-45