Restore User Defaults; Password; Set Password - Thermo Scientific 43i Instruction Manual

Operation
Restore User

RESTORE USER DEFAULTS:

RANGE

Password

Set Password

3-80 Model 43i Trace Level-Enhanced Instruction Manual
The Restore User Defaults screen is used to reset the user calibration and
configuration values to factory defaults. The restore default user is visible
Defaults
only when the instrument is in service mode. For more information on the
service mode, see "Service Mode" earlier in the chapter.
In the Main Menu, choose Service > Restore User Defaults.
AVG DIAGS ALARM
The Password menu allows the user to configure password protection. If
the instrument is locked, none of the settings may be changed via the front
panel user interface. The items visible under the password menu are
determined by the instrument's password status.
In the Main Menu, choose PasswordSet .
The Set Password screen is used to set the password to unlock the front
panel. The set password is shown if the instrument is unlocked and the
password is set.
DISPLAY PIXEL TEST:
DURING TEST PRESS
TO EXIT, TO
BEGIN TEST
GO BACK TO MENU
RANGE AVG
RESTORE USER DEFAULTS:
RESTORE
ARE YOU SURE YOU WANT
PRESS
RANGE
PASSWORD MENU:
>SET PASSWORD
LOCK INSTRUMENT
CHANGE PASSWORD
REMOVE PASSWORD
UNLOCK INSTRUMENT
RANGE AVG DIAGS ALARM
OR XX
TOGGLEXXXXXX
DIAGS ALARM
TO CONFIRM RESTORE
AVG DIAGS ALARM
RESTORE
TO?x
Thermo Fisher Scientific