Figure 2-1. Remove The Packing Material; Figure 2-2. Removing The Shipping Screws - Thermo Scientific 43i Instruction Manual

Installation
Unpacking and Inspection
2-2 Model 43i Trace Level-Enhanced Instruction Manual
1. Remove the instrument from the shipping container and set it on a
table or bench that allows easy access to both the front and rear.
2. Remove the cover to expose the internal components.
3. Remove the packing material (Figure 2–1).
Units without Optional I/O Board
Figure 2–1. Remove the Packing Material
4. Remove the three shipping screws from the pump (Figure 2–2).
Figure 2–2. Removing the Shipping Screws
Remove Packing
(2 pieces)
Units with Optional I/O Board
Remove Packing
(2 pieces)
Shipping Screws (3)
Thermo Fisher Scientific