Advertisement
Thermo Fisher Scientific
Alarms
alarm chamber temp min
alarm chamber temp max
These commands report the chamber temperature alarm minimum and
maximum value current settings. The example that follows reports that the
chamber temperature alarm minimum value is 35.0 °C.
Send:
Receive:
set alarm chamber temp min value
set alarm chamber temp max value
These commands set the chamber temperature alarm minimum and
maximum values to value, where value is a floating-point number
representing chamber temperature alarm limits in degrees C. The example
that follows sets the chamber temperature alarm maximum value to 55.0
°C.
Send:
Receive:
alarm conc so2 min
alarm conc so2 max
These commands report the SO
maximum values current setting. The example that follows reports that the
SO
concentration minimum is 5.2 ppb.
2
Send:
Receive:
set alarm conc so2 min value
set alarm conc so2 max value
These commands set the SO
maximum values to value, where value is a floating-point representation of
the concentration alarm limits. Values must be in the ppb or μg/m
to "Entering Units in PPB" in this chapter. The example that follows sets
the SO
2
Send:
Receive:
alarm chamber temp min
alarm chamber temp min 35.0 deg C
set alarm chamber temp max 55.0
set alarm chamber temp max 55.0 ok
alarm conc so2 min
alarm conc so2 min 5.2 ppb
concentration alarm minimum and
2
concentration alarm maximum value to 80 ppm.
set alarm conc so2 max 80000
set alarm conc so2 max 80000 ok
C-Link Protocol Commands
concentration alarm minimum and
2
Model 43i Trace Level-Enhanced Instruction Manual
Alarms
3
. Refer
B-11
Advertisement
Troubleshooting
