Advertisement
C-Link Protocol Commands
Datalogging
Datalogging
B-16
Model 43i Trace Level-Enhanced Instruction Manual
set led onoff
These commands set the optical test LED on or off. The example that
follows turns the optical test LED off.
Send:
set lamp off
Receive:
set lamp off ok
clr records
This command will clear all long and short records that have been saved.
Send:
clear records
Receive:
clear records ok
set clr lrecs
set clr srecs
These commands will clear only the long records or only the short records
that have been saved. The example that follows clears short records.
Send:
set clr srecs
Receive:
set clr srecs ok
list din
list dout
These commands report the current selection for the digital outputs in the
format. Output no Index number variable name active state. The active
state for digital outputs is open or closed. The active state for digital inputs
is high or low.
Send:
list dout
Receive:
list dout
output index variable state
1 28 CONC ALARM closed
2 2 LOCAL/REMOTE open
3 4 UNITS closed
4 11 HI SO2 CONC open
7 7 SAMPLE MODE open
8 8 SO2 MODE open
list lrec
list srec
list stream
list sp
These commands report the list of current selections for long record
logging data, short record logging data, streaming data output, or the
scratch pad (sp) list. The example that follows shows the list for streaming
data output.
Thermo Fisher Scientific
Advertisement
Troubleshooting
