Advertisement
Measurement
Configuration
Thermo Fisher Scientific
To convert this data into a BMP for use with windows, it needs to be
turned into a 4BPP as that is the smallest windows can display. Also note
that BMP files are upside down relative to this data, i.e. the top display line
is the last line in the BMP.
sc
screen
This command is meant for backward compatibility on the C series. Screen
information is reported using the "iScreen" command above.
Send:
screen
Receive:
screen
This is an I series
Instrument. Screen
Information not
available
range
range so2
high range
low range
These commands report SO
low ranges in dual or auto range mode. If the mode is incorrect, the
instrument responds with "can't, wrong settings". The example that follows
reports that the SO
full-scale range to 50 ppm, according to Table B–6
2
and Table B–7.
range in single range mode, or the high and
2
Model 43i Trace Level-Enhanced Instruction Manual
C-Link Protocol Commands
Measurement Configuration
B-27
Advertisement
Troubleshooting
