Advertisement
About This Manual
Safety and Equipment
Damage Alerts
vi
Model 43i Trace Level-Enhanced Instruction Manual
Appendix C "MODBUS Protocol" provides a description of the
●
MODBUS Protocol Interface and is supported both over RS-232/485
(RTU protocol) as well as TCP/IP over Ethernet.
Appendix D "Geysitech (Bayern-Hessen) Protocol" provides a
●
description of the Geysitech (Bayern-Hessen or BH) Protocol Interface
and is supported both over RS-232/485 as well as TCP/IP over
Ethernet.
Appendix E "Standards for Trace Level Analyzers" provides
●
information about generating zero air.
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
DANGER
WARNING
CAUTION
Equipment Damage
Safety and Equipment Damage Alerts in this Manual
Alert
WARNING
Equipment Damage
Description
A hazard is present that will result in death or serious
personal injury if the warning is ignored.
A hazard is present or an unsafe practice can result in
serious personal injury if the warning is ignored.
The hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
The hazard or unsafe practice could result in property
damage if the warning is ignored.
Description
If the equipment is operated in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
The service procedures in this manual are restricted to
qualified service personnel only.
The Model 43i Trace Level-Enhanced is supplied with a
three-wire grounding cord. Under no circumstances
should this grounding system be defeated.
Do not attempt to lift the analyzer by the cover or other
▲
external fittings.
Some internal components can be damaged by small
amounts of static electricity. A properly grounded
antistatic wrist strap must be worn while handling any
▲
▲
▲
▲
▲
▲
▲
Thermo Fisher Scientific
Advertisement
Troubleshooting
