Advertisement
Set defaults
Dilution Ratio
Display Pixel Test
Thermo Fisher Scientific
The Set Defaults screen allows the user to reset the configuration values to
factory defaults.
In the Main Menu, choose Service > Perm Oven Settings > Factory Cal
Oven Therm > Set Defaults.
RESTORE DEFAULT SETTINGS:
FOR PERM OVEN HTR THERM
ARE YOU SURE YOU WANT
PRESS
RANGE
The Dilution Ratio screen allows the user to view and set the dilution ratio.
Acceptable values are 1–500: 1. The default is 1:1. When this value is set,
the dilution ratio is applied to all concentration measurements. This screen
is only accessible if the dilution ratio option is installed.
In the Main Menu, choose Service > Dilution Ratio.
DILUTION RATIO:
CURRENTLY:
SET TO:
CHANGE VALUE
The Display Pixel Test is used to test the LCD display. The display pixel
test screen is visible only when the instrument is in service mode. For more
information on the service mode, see "Service Mode" earlier in the chapter.
In the Main Menu, choose Service > Display Pixel Test.
RESTORE
TO CONFIRM RESTORE
AVG
DIAGS ALARM
001.0 :1
002.0 :1 ?
MOVE CURSOR
SAVE
Model 43i Trace Level-Enhanced Instruction Manual
Operation
Service Menu
TO?x
3-79
Advertisement
Troubleshooting
