Advertisement
Factory Calibrate Gas
Low and High Points
Set defaults
Thermo Fisher Scientific
The Factory Calibrate Gas Thermistor submenu is used for calibrating the
permeation oven gas thermistor to either low point, high point, or set
Thermistor
defaults.
In the Main Menu, choose Service > Perm Oven Settings > Factory Cal
Gas Therm.
The Calibrate Gas Thermistor Low Point screen allows the user to view
and set the permeation oven thermistor resistance. The low and high point
screens function the same way.
In the Main Menu, choose Service > Perm Oven Settings > Factory Cal
Gas Therm > Low Point.
The Set Defaults screen allows the user to reset the configuration values to
factory defaults.
In the Main Menu, choose Service > Perm Oven Settings > Factory Cal
Gas Therm > Set Defaults.
PERM OVEN SETPOINT:
CURRENTLY:
NOT PRESENT
SET TO:
CHANGE VALUE
SAVE VALUE
RANGE
AVG
FACTORY CAL OVEN THERM:
>LOW POINT
HIGH POINT
SET DEFAULTS
RANGE
AVE
CAL GAS THERM LOW POINT:
CURRENTLY:
SET TO:
MOVE CURSOR
CHANGE VALUE
RANGE
AVG
Model 43i Trace Level-Enhanced Instruction Manual
o
45
C ?
DIAGS ALARM
DIAGS ALARM
3850 Ohms
04000
Ohms
SAVE
DIAGS ALARM
Operation
Service Menu
3-77
Advertisement
Troubleshooting
