Table B-9. Reply Termination Formats - Thermo Scientific 43i Instruction Manual

Thermo Fisher Scientific
Send: format
Receive: format 00
set format format
This command sets the reply termination format, where format is set
according to Table B–9. The example that follows sets the reply
termination format to checksum.
Send: set format 01
Receive: set format 01 ok
Table B–9. Reply Termination Formats
Format
Reply Termination
00 <CR>
01 <NL> sum xxxx <CR>
where xxxx = 4 hexadecimal digits that represent the sum of all the
characters (bytes) in the message
host name
This command reports the host name string.
Send: host name
Receive: host name analyzer01
set host name string
This command sets the host name string, where string is 1-13 alphanumeric
characters.
Send: set host name analyzer01
Receive: set host name analyzer01 ok
instr name
This command reports the instrument name.
Send: instr name
Receive: instr name
SO2 Analyzer
SO2 Analyzer
instrument id
This command reports the instrument id.
Send: instrument id
Receive: instrument id 12
C-Link Protocol Commands
Communications Configuration
Model 43i Trace Level-Enhanced Instruction Manual B-37