Figure 3-6. Analog Output In Autorange Mode; Figure 3-7. Pin-Out Of Rear Panel Connector In Auto-Range Mode - Thermo Scientific 43i Instruction Manual

Operation
Range Menu
Figure 3–6. Analog Output in Autorange Mode
By default, in the autorange mode, the analog outputs are arranged on the
rear panel connector as shown in Figure 3–7. See Table 3–4 for channels
and pin connections. Autorange mode may be selected from "Range Mode
Select" in the "Service Menu" later in this chapter.
Figure 3–7. Pin-Out of Rear Panel Connector in Auto-Range Mode
Thermo Fisher Scientific Model 43i Trace Level-Enhanced Instruction Manual 3-11