The Leading Edge Of The Image Is Consistently Misaligned With The Original; The Leading Edge Of The Image Is Sporadically Misaligned With The Original; Paper Is Wrinkled; Offset Occurs - Olivetti d-Copia 3500MF Service Manual

(11) The leading edge of the image is consistently misaligned with the original.

Print example
Misadjusted leading edge reg-
istration.
Misadjusted the deflection in
the paper.
Misadjusted scanner leading
edge registration.

(12) The leading edge of the image is sporadically misaligned with the original.

Print example
Paper feed clutch, middle
clutch, registration clutch or
duplex clutch operating incor-
rectly. (35 ppm model)
Paper feed clutch, middle
motor, registration motor or
duplex motor operating incor-
rectly. (45 ppm model/55 ppm
model)

(13) Paper is wrinkled.

Print example
Paper curled.
Paper damp.
Defective pressure springs.

(14) Offset occurs.

Print example
Deformed or worn cleaning
blade in the drum unit.
Defective transfer belt clean-
ing.
Defective fuser unit.
Wrong types of paper.
Y113350-5
Causes
Run maintenance mode U034 to readjust the leading edge
registration (see page 1-3-33).
Run maintenance mode U051 to readjust the deflection in
the paper (see page 1-3-39).
Run maintenance mode U066 to readjust the scanner
leading edge registration (see page 1-3-49).
Causes
Check the installation of the clutch. If it operates incor-
rectly, replace it.
Check the installation of the clutch or motor. If it operates
incorrectly, replace it.
Causes
Check the paper storage conditions.
Check the paper storage conditions.
Replace the fuser unit (see page 1-5-36).
Causes
Replace the drum unit (see page 1-5-29).
Replace the transfer belt unit (see page 1-5-34).
Replace the fuser unit (see page 1-5-36).
Check if the paper meets specifications. Replace paper.
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
1-4-65
2LL/2LJ/2LH
Sevice Manual