Olivetti d-Copia 3500MF Service Manual page 92

Item No.
U031 Checking switches and sensors for paper conveying
Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensors for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
MPT Jam
Cassette1 Feed
Cassette2 Feed
Feed2(Feed B)
Regist
Exit Feed
DU1
DU2
Bridge2 Feed
Bridge Exit
Exit Paper
Fuser Feed
Feed1(Mid)
Exit Job Separator
Regist Loop Sensor
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Display
MP feed sensor (MPFS)
Feed sensor 1 (FS1)
Feed sensor 2 (FS2)
Paper conveying sensor (PCS)
Registration sensor (RS)
Fuser eject sensor (FUES)
Duplex sensor 1 (DUS1)
Duplex sensor 2 (DUS2)
Bridge conveying sensor 2 (BRCS2)
Bridge eject sensor (BRES)
Eject full sensor (EFS)
Loop sensor (LPS)
Middle sensor (MS)
Switchback sensor (SBS)
Regist deflection sensor (RDS)
Description
Description
1-3-30
2LL/2LJ/2LH
Y113350-5