Table of Contents
Advertisement
(18) Image center does not align with the original center.
Print example
Misadjusted image center
line.
Misadjusted scanner center
line.
Original is not placed cor-
rectly.
Paper is not placed correctly.
(19) Unevenly repeating horizontal streaks in the printed objects. Colored spots in
the printed objects.
Print example
The device is installed in an
altitude greater than 1500 m
sea level.
Y113350-5
Causes
Run maintenance item U034 to readjust the center line of
image printing (see page 1-3-34).
Run maintenance item U067 to readjust the scanner lead-
ing edge registration (see page 1-3-50).
Place the original correctly.
Place the paper correctly.
Causes
35 ppm model
Run maintenance mode U140 and turn both AC Calib and
High Altitude to Mode1. If changing to Mode1 won't work,
change to Mode2 (see page 1-3-82).
45 ppm model/55 ppm model
Run maintenance mode U140 and run calibration in high
altitude mode (see page 1-3-82).
Check procedures/corrective measures
Check procedures/corrective measures
1-4-67
2LL/2LJ/2LH
Sevice Manual
Advertisement
Table of Contents
