(4) Detaching and refitting the lift motor 1 and 2
Procedure
1. Remove the power source assembly
(see page 1-5-45).
2. Remove the connector each.
3. Remove two screws each.
4. Remove the lift motor 1 and 2.
5. Check or replace the lift motor and refit
all the removed parts.
Y113350-5
Lift motor
Connector
Figure 1-5-108
1-5-65
2LL/2LJ/2LH
Lift motor 1
Lift motor 2
Screws
Sevice Manual