Pwbs; Detaching And Refitting The Main Pwb - Olivetti d-Copia 3500MF Service Manual

1-5-7 PWBs

(1) Detaching and refitting the main PWB

Procedure
1. Remove the rear upper cover (see page
1-5-52).
2. Open the controller lid.
3. Remove two screws.
4. Unhook six hooks and then remove the
left upper cover.
5. Release seven wire saddles on the con-
troller box.
6. Remove the wire holder.
Service Manual
Controller lid
Hooks
Hook
Left upper
cover
Wire
saddles
Wire
saddle
1-5-38
Screws
Hooks
Figure 1-5-62
Wire holder
Wire saddles
Controller box
Figure 1-5-63
2LL/2LJ/2LH
Left upper
cover
Wire
saddle
Y113350-5