Olivetti d-Copia 3500MF Service Manual page 109

Item No.
U065 Adjusting the scanner magnification
Description
Adjusts the magnification of the original scanning.
Purpose
Make the adjustment if the magnification in the main scanning direction is incorrect.
Make the adjustment if the magnification in the auxiliary scanning direction is incorrect.
Caution
The magnification adjustment along the main scanning direction could cause black streaks
depending on the content of the original document.
Adjust the magnification of the scanner in the following order.
U039
(P.1-3-38)
Method
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
Main Scan
Sub Scan
Adjustment: [Main Scan]
1. Change the setting value using the +/- keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
2. Press the start key. The value is set.
Y113350-5
Description
U065
main scanning
direction
Description
Scanner magnification in the
main scanning direction
Scanner magnification in the
auxiliary scanning direction
Original
Figure 1-3-8
1-3-47
U065
auxiliary scanning
direction
Setting
range
-75 to 75
-125 to 125 0
Copy
Copy
example 2
example 1
2LL/2LJ/2LH
Initial Change in
setting value per step
0 0.02 %
0.02 %
Sevice Manual