Table of Contents
Advertisement
SPECIAL COPYING FEATURES
ERASING SHADOWS FROM COPIES (FRAME ERASE)
When copying an original, the frame erase function
eliminates shadows, borders, and binding holes by
covering the original with a fixed-width white border.
This results in a clean copy.
NOTE: Frame erase copying cannot be used for
originals fed through the Automatic Document Feeder
(ADF), or when copying onto copy paper in the stack
bypass.
SUMMARY OF FRAME ERASE OPTIONS
ORIGINAL FRAME ERASE
Erases the dark borders and frame lines that appear
around the original image when the original is smaller
than the selected paper size.
SHEET FRAME ERASE
Creates a blank border about 7 mm in width around the
edge of the copy sheet.
BOOK FRAME ERASE
Erases the dark border as well as centre and contour
lines that appear when copying facing pages in a bound
original onto a single copy sheet. This mode is useful
when copying from a book or magazine.
BINDING ERASE
Erases the shadows that appear in copies from binding
holes in originals.
ERASING SHADOWS AROUND THE IMAGE ON
COPIES (ORIGINAL FRAME ERASE)
This feature eliminates the dark border and frame lines
around the original image when the original is smaller
than the selected paper size.
Follow the steps below to copy an original without border
area shadows.
1. Press COPY to switch to copy mode.
2. Set the original on the platen glass.
❏ If necessary, you can adjust the copy exposure
and image quality.
3. Press Copy Special Features.
4. Press F3 (FRAME ERASE).
SELECT A FRAME ERASE FEATURE
FRAME ERASE
SHEET FR ERS BOOK FR ERS
5. Press F1 (FRAME ERASE).
SELECT THE ORIGINAL SIZE
6. Press F4 (ORIGINAL SIZE) to select the size of the
original.
❏ The selection changes every time you press F4.
SELECT THE ORIGINAL SIZE
SPECIAL COPYING FEATURES
CANCEL: RETURN
P/HOLE ERASE
A4
ORIGNAL SIZE
A4
A5
A4
A3
ORIGNAL SIZE
5 - 1
Advertisement
Table of Contents
