The Leading Edge Of The Image Is Consistently Misaligned With The Original; The Leading Edge Of The Image Is Sporadically Misaligned With The Original; Paper Creases; Offset Occurs - Olivetti d-Copia 1600 Service Manual

2HA/2HB

(11) The leading edge of the image is consistently misaligned with the original.

Copy example
Misadjusted leading edge registration. Readjust the leading edge registration (see page 1-3-12).
Misadjusted scanner leading edge
registration.

(12) The leading edge of the image is sporadically misaligned with the original.

Copy example
Paper feed clutch, MP paper feed
clutch or registration motor installed
or operating incorrectly.

(13) Paper creases.

Copy example
Paper curled.
Paper damp.
Defective pressure springs.
Defective separation.
Dirty separation electrode.

(14) Offset occurs.

Copy example
Defective cleaning blade.
Defective fuser section.
1-4-24
Causes
Causes
Causes
Causes
Check procedures/corrective measures
Readjust the scanner leading edge registration (see page 1-
3-19).
Check procedures/corrective measures
Check the installation position and operation of the paper
feed clutch, MP paper feed clutch and registration motor. If
any of them operates incorrectly, replace it.
Check procedures/corrective measures
Check the paper storage conditions.
Check the paper storage conditions.
Replace the pressure springs.
Check the drum separation claws and heat roller separation
claws.
Clean the separation electrode.
Check procedures/corrective measures
Replace the drum unit (see page 1-5-23).
Check the heat roller and press roller.