Olivetti d-Copia 3500MF Service Manual page 367

4. Remove two screws (M4 × 12) and then
remove the fuser unit.
5. Check or replace the fuser unit and refit
all the removed parts.
6. When replacing the new fuser unit, pro-
ceed as follows:
1) Performs maintenance mode U167
(clearing the fuser count) (see page
1-3-93).
2)Performs maintenance mode U464
(Calibration) (see page 1-3-157).
3)Performs maintenance mode U410
(Adjusting the halftone automatically)
(see page 1-3-140).
Y113350-5
Screw
(M4x12)
Figure 1-5-61
1-5-37
2LL/2LJ/2LH
Fusre unit
Screw
(M4x12)
Sevice Manual