Olivetti d-Copia 3500MF Service Manual page 295

Code Contents
8410 Punch slide motor error 1
The punch slide sensor won't
turn On when home position
has been moved by 30 mm.
8420 Punch slide motor error 2
In detection of paper edges,
the paper edge cannot be
detected in 30 mm move.
8430 Punch unit communication
error
Communication with the
punch unit is not possible.
Y113350-5
Causes
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet Punch slide motor and punch PWB (YC3)
finisher). Punch slide sensor and punch PWB (YC6)
Punch PWB (YC1) and DF main PWB (YC7)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet Punch slide motor and punch PWB (YC3)
finisher). Punch slide sensor and punch PWB (YC6)
Punch PWB (YC1) and DF main PWB (YC8)
Defective slide Replace the punch slide sensor.
sensor.
Defective punch Replace the punch slide motor.
slide motor.
Defective PWB. Replace the punch PWB or DF main PWB
and check for correct operation.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet Punch slide motor and punch PWB (YC3)
finisher). Punch PWB (YC1) and DF main PWB (YC7)
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet Punch slide motor and punch PWB (YC3)
finisher). Punch PWB (YC1) and DF main PWB (YC8)
Defective punch Replace the punch slide motor.
slide motor.
Defective PWB. Replace the punch PWB or DF main PWB
and check for correct operation.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (4000-sheet Punch PWB (YC1) and DF main PWB (YC7)
finisher).
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector (1000-sheet Punch PWB (YC1) and DF main PWB (YC8)
finisher).
Defective PWB. Replace the punch PWB or the DF main
PWB and check for correct operation.
1-4-53
2LL/2LJ/2LH
Check procedures/
corrective measures
Sevice Manual