Olivetti d-Copia 3500MF Service Manual page 203

Item No.
U411 Adjusting the scanner automatically
Description
Uses a specified original and automatically adjusts the following items in the scanner and the DP
scanning sections.
Purpose
To perform automatic adjustment of various items in the scanner and the DP scanning sections.
Perform adjustments using a new test chart (chart 1) when replacing ISC PWB, LED lamp PWB,
ISU, CIS and/or DP main PWB.
Method
1. Press the start key.
2. Select the item.
Display
Table (Chart1)
DP FaceUp
(Chart1)
DP FaceDown
(Chart1)
Table (Chart2)
DP FaceUp
(Chart2)
DP FaceDown
(Chart2)
Target
DP Auto Adj
Method: [Table (Chart1)]
To manually enter the target value
1. Enter the target values which are shown on the specified original (P/N: AVGR14938B) execut-
ing maintenance item U425. Set a specified original (P/N: AVGR14938B) on the platen.
2. Enter maintenance item U411.
3. Select [Target].
4. Select [U425] and press the start key.
5. Select [Table (Chart1)].
6. Select the item.
Y113350-5
Description
Description
Automatic adjustment in the scanner sec-
tion (chart 1)
Do not use.
Automatic adjustment in the DP scanning
section (first side) (chart 1)
Automatic adjustment in the DP scanning
section (second side) (chart 1)
Automatic adjustment in the scanner sec-
tion (chart 2)
Automatic adjustment in the DP scanning
section (first side) (chart 2)
Automatic adjustment in the DP scanning
section (second side) (chart 2)
Set-up for obtaining the target value
Automatic adjustment of automatic docu-
ment processor using the chart printed
from the machine
1-3-141
2LL/2LJ/2LH
Original to be used
for adjustment (P/N)
AVGR14938B
AVGR14938B
AVGR14938B
AVGR05131K
AVGR11211F
AVGR11211F/
AVGR05133T/
AVGR05134Q
-
-
Sevice Manual