Olivetti d-Copia 3500MF Service Manual page 144

Item No.
U140 Displaying developer bias
Description
Displays and changes various developer bias value.
Purpose
To check or changes the developer bias value.
Method
1. Press the start key.
2. Select the item to be set.
Sleeve DC
Sleeve AC
Mag DC
Mag AC
Sleeve Freq
Sleeve Duty
Mag Duty
AC Calib
Setting: [Sleeve DC]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
K
3. Press the start key. The value is set.
Setting: [Sleeve AC]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
K
3. Press the start key. The value is set.
Service Manual
Display
Developer sleeve roller DC bias
Developer sleeve roller AC bias
Developer magnet roller DC bias
Developer magnet roller AC bias
Developer sleeve roller frequency
Developer sleeve roller duty
Developer magnet roller duty
Executing or setting the AC calibration
Description
Developer sleeve roller DC bias
Description
Developer sleeve roller AC bias
Description
Description
Setting
range
0 to 255
Setting
range
0 to 255
1-3-82
2LL/2LJ/2LH
Initial setting
35ppm 45ppm 55ppm
62 62 70
Initial setting
35ppm 45ppm 55ppm
159 159 150
Y113350-5