6. Remove two connectors from the hard
disk unit while pushing the lock lever.
7. Remove four screws and then remove
the hard disk unit from the HDD
bracket.
8. Replace the hard disk unit and refit all
the removed parts.
1. Perform maintenance mode U024
(HDD formatting) (see page 1-3-28).
2. Install the firmwares by the following
procedure.
1)Connects to the machine the USB
memory that preserved Software
LANGUAGE BR, JP (Opt Font,Opt
Msg), and the PDF1.7 resource.
The firmware is installed by switching
the main power switch to ON/OFF.
2)Connects to the machine the USB
memory that preserved WeeklyTimer,
FMU application.
Installs the firmware from the applica-
tion screen of the system menu.
(Refer to operation guide.)
3. Perform maintenance mode U917
(backup data writing) (see page 1-3-
167).
Service Manual
Hard
disk unit
Lever
Connector
Figure 1-5-114
Screws
Figure 1-5-115
1-5-70
2LL/2LJ/2LH
Lever
Connector
HDD bracket
Screws
Hard disk unit
Y113350-5