3. Remove the operation panel sheet.
4. Replace the operation panel sheet of
the corresponding language.
5. Refit the clear panel.
6. Refit the operation panel covers A and
B.
Installing the original platen or DP (option)
1. Install optional original platen or DP.
Installing other optional devices
1. Install the optional devices (job separa-
tor, document finisher and/or fax kit
etc.) as necessary.
Installing the cassette heater (option)
1. Install the optional cassette heater as
necessary (see page 1-2-63).
Connect the power cord
1. Connect the power cord to the power
cord connector on rear lower of the
machine.
2. Connect the power plug to the wall out-
let.
Service Manual
Operation
panel sheet
Figure 1-2-20
1-2-14
2LL/2LJ/2LH
Y113350-5