Detaching And Refitting The Transfer Belt Unit - Olivetti d-Copia 3500MF Service Manual

(2) Detaching and refitting the transfer belt unit

Procedure
1. Pull the paper conveying unit out.
2. Remove three screws and then remove
the conveying rear middle cover.
3. Remove the connector.
4. Unhook the two hooks by the tip of a
screwdriver though the hole and then
remove the front and rear transfer hold-
ers.
Service Manual
Paper
conveying unit
Connector
Conveying rear
middle cover
Hook
Hole
Screw
Hook
Hole
Rear transfer holder
1-5-34
Figure 1-5-57
Hook
Hook
Hole
Front transfer holder
Figure 1-5-58
2LL/2LJ/2LH
Screw
Screw
Screw
Hole
Screw
Y113350-5