Olivetti d-Copia 3500MF Service Manual page 84

Hide thumbs Also See for d-Copia 3500MF:

Table of Contents

Exiting the maintenance mode

Exits the maintenance mode and returns to the normal copy mode.

To exit the maintenance mode.

1. Press the start key. The normal copy mode is entered.

Setting the factory default data

Restores the machine conditions to the factory default settings.

To move the mirror frame of the scanner to the position for transport.

1. Press the start key.

2. Select [Mode1(All)].

3. Press the start key.

The mirror frame of the scanner returns to the home position.

4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.

* : An error code is displayed in case of an initialization error.

When errors occurred, turn main power switch off then on, and execute initialization using

maintenance item U002.

Service Manual

Entity error

Controller error

Engine error

Scanner error

D-copia 4500mf D-copia 5500mf