Olivetti d-Copia 3500MF Service Manual page 342

5. Remove two connectors.
6. Release the wire saddle.
7. Remove the wire saddle.
*: To refit the wire saddle, be sure to fit in
the positioning hole that was previously
used.
8. Remove the MP tray.
*: When refitting the MP tray, insert it in
the MP tray paper feed unit side by
turning the lift arm.
Service Manual
Figure 1-5-19
MP tray paper feed unit
Figure 1-5-20
1-5-12
2LL/2LJ/2LH
Connector
Wire
saddle
Connector
Installation
hole
Wire
saddle
MP tray
Lift arm
MP tray
Y113350-5