Olivetti d-Copia 3500MF Service Manual page 160

Item No.
U206 Setting the presence or absence of a coin vender
Description
Sets the presence or absence of the optional coin vender.
This is an optional device which is currently supported only by Japanese specification machines.
Purpose
To run this maintenance item if a coin vender is installed.
Method
1. Press the start key.
2. Select the item to be set.
On/Off Config
No Coin Action
Price
Setting: [On/Off Config]
1. Select On or Off.
On
Off
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [No Coin Action]
1. Select the item.
All Clear
Auto Clear
Off
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Service Manual
Display
Sets the presence or absence of the coin vender
Behavior when change runs out during copying
Charge per copy by size and color
Display
The coin vender is installed
The coin vender is not installed
Display
All clear is performed
Auto clear is performed
Clear is not performed
Description
Description
Description
Description
1-3-98
2LL/2LJ/2LH
Y113350-5