Table of Contents
Advertisement
Item No.
U100
Setting: [Adj DC Bias]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
Increasing the setting makes the image lighter; decreasing it makes the image darker.l
Display
DC2 Bias(K)
DC2 Bias Half(K)
3. Press the start key. The value is set.
Setting: [Set Low Temp]
1. Change the value using the +/- or numeric keys.l
Display
Set Low Temp
2. Press the start key. The value is set.
Setting: [Set Charger Freq]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.lll
Display
Generally
3. Press the start key. The value is set.
Displaying: [Chk Current]
1. The current setting is displayed.
K
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt
copying mode (which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for maintenance item No. is displayed.
Y113350-5
Main charger DC bias (full speed)
Main charger DC bias (half speed)
Pre-charge time at power supply ON
Main charger frequency
Display
Rush current
Description
Description
Description
Description
Description
1-3-67
2LL/2LJ/2LH
Setting
range
setting
128 to 127 0
128 to 127 0
Setting
Initial
range
setting
0 to 6
1
Setting
Initial
range
setting
7500 to 11280
9160
Sevice Manual
Initial
Advertisement
Table of Contents
