Item No.
U034
5. Change the setting value using the +/- keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y113350-5
Description
Center line of printing
(within ± 2.0 mm)
Correct image
Figure 1-3-5
U067
U072
(P.1-3-50)
(P.1-3-56)
1-3-35
Output
Output
example 1
example 2
2LL/2LJ/2LH
Sevice Manual