Olivetti d-Copia 3500MF Service Manual page 285

Hide thumbs Also See for d-Copia 3500MF:
Table of Contents

Advertisement

Code
Contents
8030
Punch motor error 3
Home position does not turn
from On to Off in 50 ms after
home position has been ini-
tialized.
8090
DF paddle motor error
When the DF paddle motor is
driven, DF paddle sensor
does not turn on within 1 s.
Y113350-5
Causes
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector (4000-sheet
Punch motor and punch PWB (YC4)
finisher).
Punch PWB (YC1) and DF main PWB (YC7)
Reinsert the connector. Also check for conti-
Defective connec-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector (1000-sheet
Punch motor and punch PWB (YC4)
finisher).
Punch PWB (YC1) and DF main PWB (YC8)
Defective punch
Replace the punch motor.
motor.
Defective PWB.
Replace the punch PWB or DF main PWB
and check for correct operation.
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector (4000-sheet
DF paddle motor and DF main PWB (YC15)
finisher).
DF paddle sensor and DF main PWB
(YC22)
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector (1000-sheet
DF paddle motor and DF main PWB (YC11)
finisher).
DF paddle sensor and DF main PWB
(YC20)
Defective DF pad-
Replace the DF paddle sensor.
dle sensor.
Defective DF pad-
Replace the DF paddle motor.
dle motor.
Defective DF main
Replace the DF main PWB and check for
PWB.
correct operation.
1-4-43
2LL/2LJ/2LH
Check procedures/
corrective measures
Sevice Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-copia 4500mfD-copia 5500mf

Table of Contents