Olivetti d-Copia 3500MF Service Manual page 155

Item No.
U167 Checking/clearing the fuser count
Description
Displays and clears the fuser count for checking.
Purpose
To check the fuser count after replacement of the fuser unit. Also to clear the counts after replac-
ing unit.
Method
1. Press the start key. The fuser count is displayed.
Cnt
Clearing
1. Press [Clear].
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U199 Displaying fuser heater temperature
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The fuser temperature is displayed.
Heat Roller Edge1
Heat Roller Center
Completion
Press the stop key. The screen for selecting a maintenance mode No. is displayed.
Y113350-5
Display
Fuser unit count value
Display
Heat roller edge temperature (°C)
Heat roller center temperature (°C)
Description
Description
Description
1-3-93
2LL/2LJ/2LH
Sevice Manual