Olivetti d-Copia 3500MF Service Manual page 234

Hide thumbs Also See for d-Copia 3500MF:

Table of Contents

Relay board maintenance

Sets the mode when call for service (C0060) occurs.

Sets the machine status temporarily when call for service (C0060) occurs. However, after the set-

ting, call for service (C0060) occurs again when progress of period.

1. Press the start key.

2. Select Mode using the +/- keys.

* : Initial setting: Mode0

3. Press the start key. The setting is set.

4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.

After removing the cause of the problem, be sure to change the setting in OFF.

Service Manual

Setting mode: OFF

Setting mode: ON (Usable up to three times of use)

D-copia 4500mf D-copia 5500mf