Olivetti d-Copia 3500MF Service Manual page 101

Item No.
U051 Adjusting the deflection in the paper
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the
copy paper is Z-folded.
Method
1. Press the start key.
2. Select the item to be adjusted.
Paper Loop Amount
Adjustment
1. Press the system menu key.
2. Place an original and press the start key to make a test copy.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
MPT(L)
MPT Half(L)
Cassette(L)
Cassette
Half(L)
Duplex(L)
Duplex
Half(L)
MPT(S)
MPT Half(S)
Cassette(S)
Cassette
Half(S)
Duplex(S)
Duplex
Half(S)
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Y113350-5
Display
Deflection adjustment
Description
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Description
Description
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
1-3-39
2LL/2LJ/2LH
Initial setting
35ppm 45ppm 55ppm
1 -5 -8
1 0 -1
1 -5 -8
1 0 -1
1 -5 -8
1 0 -1
1 -5 -8
1 0 -1
1 -5 -8
1 0 -1
1 -5 -8
1 0 -1
Sevice Manual