Table of Contents
Advertisement
Item No.
U404
Adjusting margins for scanning an original from the DP
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
A Margin
B Margin
C Margin
D Margin
A Margin
(Back)
B Margin
(Back)
C Margin
(Back)
D Margin
(Back)
* : Dual scan DP only
6. Change the setting value using the cursor left/right keys or numeric keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Y113350-5
Description
Description
DP left margin
DP leading edge margin
DP right margin
DP trailing edge margin
DP left margin (second side)
DP leading edge margin
(second side)
DP right margin (second side)
DP trailing edge margin
(second side)
DP leading edge margin
(4.0 +1.5/-1.0 mm)
DP left margin
(2.5 +1.5/-2.0 mm)
DP trailing edge margin
(4.0 mm or less)
Figure 1-3-27
1-3-137
Setting
Initial
range
setting
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
0.0 to 10.0
2.0
DP right margin
(2.5 +1.5/-2.0 mm)
2LL/2LJ/2LH
Change in
value per step
0.5 mm
0.5 mm
0.5 mm
0.5 mm
0.5 mm
0.5 mm
0.5 mm
0.5 mm
Sevice Manual
Advertisement
Table of Contents
